A cambelt does not squeal, rattle or warn you. It either works or it snaps, and when it snaps the pistons meet the valves. That is why the manufacturer gives you a mileage or time interval — whichever comes first — and why ignoring an old belt is one of the most expensive false economies in motoring.
We replace the belt as a kit: belt, tensioner and idler pulleys, and on most engines the water pump, because a failed pump after a belt change means paying for the same labour twice. Timing chains are checked for stretch and rattle, and we will tell you honestly whether your engine's chain is a known weak point or a fit-and-forget item.
What is included
- Cambelt replacement with tensioners and idlers
- Water pump replacement at the same time where applicable
- Auxiliary drive belt inspection and replacement
- Timing chain and tensioner inspection for rattle and stretch
- Correct timing and re-check after fitting
- Fixed price quoted per engine code
What happens, step by step
Confirm the interval
Give us your registration and mileage and we will tell you the manufacturer's belt interval.
Fixed price
Quoted as a kit including the water pump where it makes sense.
Fit
Usually a day's work. We also look at anything else accessible while it is stripped down.
Verify
Timing checked, engine run and road tested before handover.
Where this happens
All workshop work is carried out at Unit 30, Stevenage Enterprise Centre, SG1 3HH — five minutes from Stevenage town centre and the Old Town, with parking on site. Drop-off is from 07:30 on weekdays. If the car cannot be driven, call 07876 714 517 for recovery.
